We are one of the leading
solution providers for water treatment,
wastewater treatment & recycle of water

Water Treatment

  • Clarification systems

    Raw water from all sources can be treated for suspended solids, turbidity & colloidal particles using clarification systems.

    TEIL as the leading manufacturer offers the widest range of raw water & treatment systems. Our designs & offerings are customized to project requirement and can best meet challenges of varying inlet loads, low space & area for installation, low power requirements & minimized sludge generation.

    We have designed & installed over 500 plants of varying capacities working effectively for over three decades. The treatment system comprises of flash mixer & flocculation zones where suitable chemicals are dosed for pH correction & flocculation.

    Our range of systems include the following:

    • Clarifiers
    • Clariflocculator
    • Reactor clarifiers / High Rate Solid contact clarifiers
    • Ultra High Rate Solid contact clarifier
    • Tube settlers
    • Plate settlers
  • Filtration systems

    We offer wide range of advanced filtration systems that enables treatment of suspended particles, color, odour & oil through filtration. The media filters involved filtration of particulates across surface & depth of media. These systems are backwashed when the pressure drops across the media increase.

    Our range of filtration solutions includes:

    • Gravity sand filter
    • Rapid gravity sand filters
    • Pressure sand filters
    • Dual media filters
    • Multimedia filters
    • Auto valveless gravity filters
    • Activated carbon filters
    • Walnut shell carbon filters
    • Micron filtration systems
    • Micro filtration systems
  • Process water treatment | Resin based treatment systems

    The dissolved impurities in water are best removed by ion exchange process wherein select ions are exchanged across the resins. Cationic resins (Weak base or Strong base) and Anionic resins (Weak acid or Strong acid) are used in varying combinations to treat water for different quality requirement. The resin beds, when exhausted are regenerated with chemicals in co-flow mode or counter current mode of regeneration for maximum efficiency.

    Depending upon the inlet water quality & application, selection of treatment scheme is critical to ensure maximum treatment efficiency, low footprint area & minimal chemical waste. TEIL offers advanced designs, including layered bed systems, for lowest operating costs and has a large installation base of operating plants for different industrial & institutional applications. Our DM plant designs ensure lowest chemical consumption and self neutralizing effluents.

    We offer following ion exchange treatment systems of varying capacities:

    • Water softening plant
    • De-alkaisers (partial Demineralization)
    • Demineralization plants
    • Mixed Bed polishers
    • EDI (Electro Deionization)
    • CPU (Condensate Polishing Units)
  • Membrane based treatment systems

    Reducing water availability, deteriorating water quality and growing environmental concerns are constantly challenging the economics of water treatment processes. Increased levels of dissolved solids in water have made many conventional treatment processes unviable. Membrane treatment processes are best solutions for water with high salinity, varying quality and wastewater.

    This process involves physical separation of suspended, colloidal, microbial, dissolved or selectively dissolved impurities through membranes. The membranes used have varying pore sizes that are selectively used for treatment of water. Since these membranes are susceptible to fouling and damage, suitable pre-treatment is essential to ensure maximum membrane life & economics of operation.

    TEIL uses advanced software for design, construction & operation of membrane based treatment systems for water & waste water. Our designs offer advantages of low footprint area, low power & chemical consumption, high recovery & increased membrane life. We have large installation base of UF, NF, RO & SWRO plants operating successfully over the years.

    We offer following systems of all capacities:

    • Micro Filtration system
    • Ultra-filtration system
    • Nano-filtration system
    • Reverse Osmosis system
    • Sea water desalination systems
  • Cooling water treatment systems

    Recirculation & makeup of water in cooling tower are subject to problems of increased suspended solids, ionic concentration build up, algae growth and fouling, growth of microbes & bacteria, scaling, corrosion and water losses. The optimal treatment comprises make-up water quality treatment, dosing of treatment chemicals, injecting disinfectants & filtration of circulating water.

    TEIL offers a total range of systems (with options of manual & automated operation) for cooling water treatment equipments that includes:

    • Make up water treatment (Clarifiers, Filters, Ion exchange treatment, Membrane based treatment)
    • Side stream filters (Rapid gravity filters, Pressure sand filters, Dual media filters, Auto valveless gravity filters, Back washable filters)
    • Dosing systems for chemicals like biocides, bio dispersants, anti-scalants, defoulants etc.
    • Chlorination systems (Hypochloride, Chlorine Di-oxide, Chlorine gas, Electro Chlorinators)
    • Ozonation systems