Alternator application. For co-gen plants, Captive power plants, IPP, Gas turbine plants
Efficiency is the prime requirement. More the efficiency, the better it is as power saved is power generated. Triveni offers double helical design with efficency as high as 98.9%, which results in power saving. Gearbox has to be designed to take high temporary loads due to short circuit torques which can last for 15 Minutes. Service factor selection plays important role for taking care of high short circuit torque, which are normally 6 times. Gearboxes also to be designed to take care of low load performance and also for high fluctuating loads, normally seen in the Steel industry.

Applications for Gas Turbine Power plants

• Load gearboxes
• Booster pumps
• Compressors
• Accessories gearboxes

Applications for Biomass plants

• Load Gearboxes
• BFWP

Applications for IPP

• Load Gearboxes
• BFWP

Wind Power
High fluctuating wind speed and direction, can cause breakage of the input shafts. Robust design with high service factor can ensure higher life. Gearboxes to have lower maintenance since accessability to maintain is very difficult

Hydel Power plants
Having high thrust loads , bearing design plays an important role . Gearboxes are to be designed to take up radial loads also. During runaway conditions, Gearboxes are to be designed to run atleast 3 times to normal speed for atleast 15 minutes, before the plant is shut down, hence bearings are to be designed to run at higher speeds also/

Types of Hydel Gearboxes

• Vertical and Horizontal Configurations
• Horizontal offset